Machine Tool accessories

Machine Tool accessories


Excludes: Excludes Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.

Stock Items with Pictures

Stock Items From Supply Class 3460 starting at NIIN 000000000

NSNNameStatus
3460-00-001-1300
3460-00-001-7871
3460-00-001-9259
3460-00-003-1938     ARBOR,TORSION SPRING
3460-00-003-3354
3460-00-003-7100     CLAMP,MACHINE,HOLD DOWN
3460-00-004-1003     WHEEL,ABRASIVE
3460-00-004-3825     VISE,MACHINE TABLE
3460-00-004-8874     WHEEL,ABRASIVE
3460-00-005-8716
3460-00-006-2865     PLATE,LAPPING
3460-00-006-3774     COLLET,STAND
3460-00-007-8537     WHEEL,ABRASIVE
3460-00-008-3319     WHEEL,ABRASIVE
3460-00-009-0215
3460-00-009-5437
3460-00-009-5438
3460-00-010-5069     CLAMP,MACHINE,HOLD DOWN
3460-00-011-3841     WHEEL,ABRASIVE
3460-00-012-1104
3460-00-012-2285     ARBOR,WHEEL,GRINDING-BUFFING-WIRE BRUSH
3460-00-012-4622     MANDREL,BEARING LAP
3460-00-014-6685
3460-00-014-6686
3460-00-014-6687     WHEEL,ABRASIVE
3460-00-016-9570
3460-00-016-9571
3460-00-017-2543     WHEEL,ABRASIVE
3460-00-017-2544
3460-00-018-5593     COLLET,MACHINE
3460-00-018-5925
3460-00-018-5926
3460-00-018-5927
3460-00-018-5965     BAR,DRIVING,SPOTFAC
3460-00-018-5966
3460-00-018-6016
3460-00-018-6050     EDGE FINDER
3460-00-018-6100     PLATE,LAPPING
3460-00-018-8147
3460-00-018-8149
3460-00-018-8150
3460-00-019-5167
3460-00-023-4725
3460-00-024-0192
3460-00-024-0196
3460-00-024-2477
3460-00-025-8343
3460-00-027-0849
3460-00-027-0850     WHEEL,ABRASIVE
3460-00-027-0851     WHEEL,ABRASIVE
3460-00-027-0852     WHEEL,ABRASIVE
3460-00-027-0853     WHEEL,ABRASIVE
3460-00-027-0854     WHEEL,ABRASIVE
3460-00-027-0904     WHEEL,ABRASIVE
3460-00-027-0939
3460-00-027-0940
3460-00-027-0941
3460-00-027-0942     WHEEL,ABRASIVE
3460-00-027-2368
3460-00-027-2593     TESTER,CENTER
3460-00-027-2969     COLLET,EXPANDING
3460-00-028-7056
3460-00-028-7057
3460-00-028-8129
3460-00-031-5807
3460-00-031-6717
3460-00-032-7601     HOLDER,COUNTERSINK
3460-00-033-0654
3460-00-033-0667
3460-00-033-0668
3460-00-033-0714
3460-00-033-4373
3460-00-033-4582
3460-00-033-4584
3460-00-033-4585
3460-00-033-4588     PILOT,COUNTERBORE
3460-00-034-4352
3460-00-034-8432     HOLDER,THREADING AN
3460-00-034-8433     TAP AND DIE GUIDE KIT
3460-00-034-8434
3460-00-035-3798
3460-00-035-6033     TURNING KIT,ARMATUR
3460-00-036-0247     PLATE,LAPPING
3460-00-036-0253     PLATE,LAPPING
3460-00-036-0283     BLOCK,LAPPING
3460-00-036-0323     BLOCK,LAPPING
3460-00-036-0348     PLATE,LAPPING
3460-00-037-3429
3460-00-037-3430
3460-00-037-4606
3460-00-037-4607
3460-00-037-4608
3460-00-037-4662
3460-00-037-4667
3460-00-037-4953     HOLDER
3460-00-037-4957     LAP
3460-00-037-4993
3460-00-037-4994
3460-00-037-4998
3460-00-037-5090
3460-00-037-5092
3460-00-037-5145
3460-00-037-7289
3460-00-038-0301
3460-00-038-5486     FACE PLATE,ROTARY TABLE
3460-00-041-1335
3460-00-042-4414     ATTACHMENT,COLLET H
3460-00-042-9138
3460-00-043-0133
3460-00-043-1585     ARBOR,HOLE SAW
3460-00-043-3602
3460-00-043-3624
3460-00-043-3625
3460-00-045-3469
3460-00-045-3470
3460-00-045-8903     WHEEL,ABRASIVE
3460-00-045-8904     WHEEL,ABRASIVE
3460-00-045-8905
3460-00-045-8906
3460-00-045-8907     WHEEL,ABRASIVE
3460-00-045-8908     WHEEL,ABRASIVE
3460-00-045-8909
3460-00-045-8910     WHEEL,ABRASIVE
3460-00-045-8911     WHEEL,ABRASIVE
3460-00-045-8912     WHEEL,ABRASIVE
3460-00-045-8913     WHEEL,ABRASIVE
3460-00-045-8940     WHEEL,ABRASIVE
3460-00-045-8941     WHEEL,ABRASIVE
3460-00-045-8942     WHEEL,ABRASIVE
3460-00-045-9488     WHEEL,ABRASIVE
3460-00-045-9489     WHEEL,ABRASIVE
3460-00-045-9490     WHEEL,ABRASIVE
3460-00-045-9491     WHEEL,ABRASIVE
3460-00-045-9492     WHEEL,ABRASIVE
3460-00-045-9493     WHEEL,ABRASIVE
3460-00-045-9494     WHEEL,ABRASIVE
3460-00-045-9495     WHEEL,ABRASIVE
3460-00-045-9496     WHEEL,ABRASIVE
3460-00-045-9497     WHEEL,ABRASIVE
3460-00-045-9498     WHEEL,ABRASIVE
3460-00-045-9499     WHEEL,ABRASIVE
3460-00-045-9500     WHEEL,ABRASIVE
3460-00-045-9501     WHEEL,ABRASIVE
3460-00-045-9502     WHEEL,ABRASIVE
3460-00-045-9503     WHEEL,ABRASIVE
3460-00-049-4280     COLLET
3460-00-049-4282     COLLET
3460-00-049-7910     CHUCK,DRILL
3460-00-049-7911
3460-00-050-8659     ARBOR,LATHE
3460-00-050-8660     PLATE,GRINDING
3460-00-052-3446
3460-00-052-4613     ARBOR,HOLE SAW
3460-00-052-8726     HOLDER,COUNTERSINK
3460-00-052-8727
3460-00-053-0595
3460-00-053-0676     CHUCK,DRILL
3460-00-053-5269
3460-00-055-0746     POST,DIE SET
3460-00-055-0747     POST,DIE SET
3460-00-055-0748     POST,DIE SET
3460-00-055-0749     POST,DIE SET
3460-00-055-0750
3460-00-055-0753
3460-00-055-0763
3460-00-055-4537
3460-00-056-7900
3460-00-056-8420     CHUCK,ROCK DRILL
3460-00-057-4145     WHEEL,ABRASIVE
3460-00-057-4146
3460-00-057-4147     WHEEL,ABRASIVE
3460-00-057-4148     WHEEL,ABRASIVE
3460-00-057-4149
3460-00-057-4150     WHEEL,ABRASIVE
3460-00-057-4151     WHEEL,ABRASIVE
3460-00-057-4152
3460-00-057-4635     WHEEL,ABRASIVE
3460-00-057-4636     WHEEL,ABRASIVE
3460-00-057-6624     WHEEL,ABRASIVE
3460-00-057-6625
3460-00-057-6626     WHEEL,ABRASIVE
3460-00-057-6629     WHEEL,ABRASIVE
3460-00-057-6630     WHEEL,ABRASIVE
3460-00-057-6631
3460-00-057-6632     WHEEL,ABRASIVE
3460-00-057-6633
3460-00-057-6634
3460-00-057-6635     WHEEL,ABRASIVE
3460-00-057-6636     WHEEL,ABRASIVE
3460-00-057-6637     WHEEL,ABRASIVE
3460-00-057-6638     WHEEL,ABRASIVE
3460-00-057-6639     WHEEL,ABRASIVE
3460-00-057-6640     WHEEL,ABRASIVE
3460-00-057-6641
3460-00-057-6642     WHEEL,ABRASIVE
3460-00-057-9706     WHEEL,ABRASIVE
3460-00-057-9707     WHEEL,ABRASIVE
3460-00-057-9708     WHEEL,ABRASIVE
3460-00-057-9710     WHEEL,ABRASIVE
3460-00-057-9711     WHEEL,ABRASIVE
3460-00-057-9712     WHEEL,ABRASIVE
3460-00-057-9713     WHEEL,ABRASIVE
3460-00-057-9723     WHEEL,ABRASIVE
3460-00-057-9724     WHEEL,ABRASIVE
3460-00-057-9725     WHEEL,ABRASIVE
3460-00-057-9744
3460-00-057-9745
3460-00-057-9746
3460-00-057-9762
3460-00-058-2257
3460-00-058-2258
3460-00-058-2270     WHEEL,ABRASIVE
3460-00-058-9684     JACK,VERTICAL
3460-00-059-5582
3460-00-059-5823
3460-00-060-3113
3460-00-060-7357     WHEEL,ABRASIVE
3460-00-060-7358     WHEEL,ABRASIVE
3460-00-060-7359     WHEEL,ABRASIVE
3460-00-060-7360     WHEEL,ABRASIVE
3460-00-060-7361     WHEEL,ABRASIVE
3460-00-060-7362     WHEEL,ABRASIVE
3460-00-060-7363     WHEEL,ABRASIVE
3460-00-060-7364     WHEEL,ABRASIVE
3460-00-060-7365     WHEEL,ABRASIVE
3460-00-060-7366     WHEEL,ABRASIVE
3460-00-060-7367     WHEEL,ABRASIVE
3460-00-060-7368     WHEEL,ABRASIVE
3460-00-060-7369     WHEEL,ABRASIVE
3460-00-060-7370     WHEEL,ABRASIVE
3460-00-060-7371     WHEEL,ABRASIVE
3460-00-060-7372     WHEEL,ABRASIVE
3460-00-060-7373     WHEEL,ABRASIVE
3460-00-060-7374     WHEEL,ABRASIVE
3460-00-060-7375     WHEEL,ABRASIVE
3460-00-060-7376     WHEEL,ABRASIVE
3460-00-060-7377     WHEEL,ABRASIVE
3460-00-060-7378     WHEEL,ABRASIVE
3460-00-060-7379     WHEEL,ABRASIVE
3460-00-060-7380     WHEEL,ABRASIVE
3460-00-060-7381     WHEEL,ABRASIVE
3460-00-060-7382     WHEEL,ABRASIVE
3460-00-060-7383     WHEEL,ABRASIVE
3460-00-060-7384     WHEEL,ABRASIVE
3460-00-060-7385     WHEEL,ABRASIVE
3460-00-060-7386     WHEEL,ABRASIVE
3460-00-060-7387     WHEEL,ABRASIVE
3460-00-060-7388     WHEEL,ABRASIVE
3460-00-060-7389     WHEEL,ABRASIVE
3460-00-060-7390     WHEEL,ABRASIVE
3460-00-060-7391     WHEEL,ABRASIVE
3460-00-060-7392     WHEEL,ABRASIVE
3460-00-060-7393     WHEEL,ABRASIVE
3460-00-060-7394     WHEEL,ABRASIVE
3460-00-060-7395     WHEEL,ABRASIVE
3460-00-060-7396     WHEEL,ABRASIVE
3460-00-060-7397     WHEEL,ABRASIVE
3460-00-060-7398     WHEEL,ABRASIVE
3460-00-060-7399     WHEEL,ABRASIVE
3460-00-060-7400     WHEEL,ABRASIVE
3460-00-060-7401     WHEEL,ABRASIVE
3460-00-060-7402     WHEEL,ABRASIVE
3460-00-060-7403     WHEEL,ABRASIVE
3460-00-060-7404     WHEEL,ABRASIVE
3460-00-060-7405     WHEEL,ABRASIVE
3460-00-060-7407     WHEEL,ABRASIVE
3460-00-060-7408     WHEEL,ABRASIVE
3460-00-060-7409     WHEEL,ABRASIVE
3460-00-061-5165
3460-00-061-7104     CHUCK,DRILL
3460-00-062-8337
3460-00-063-1890
3460-00-063-7314     CENTER,LATHE
3460-00-063-7315     CENTER,LATHE
3460-00-063-7318
3460-00-063-7325
3460-00-063-7327
3460-00-063-7329
3460-00-063-7330
3460-00-064-9851
3460-00-065-6752
3460-00-066-2787     TOOL POST,LATHE
3460-00-066-2788     TOOL POST,LATHE
3460-00-067-5158
3460-00-067-8233     WHEEL,ABRASIVE
3460-00-067-9500
3460-00-068-3849
3460-00-069-4878     WHEEL,ABRASIVE
3460-00-069-4879     WHEEL,ABRASIVE
3460-00-069-4880     WHEEL,ABRASIVE
3460-00-069-4881     WHEEL,ABRASIVE
3460-00-069-4882     WHEEL,ABRASIVE
3460-00-069-4883     WHEEL,ABRASIVE
3460-00-069-4884     WHEEL,ABRASIVE
3460-00-069-4885     WHEEL,ABRASIVE
3460-00-069-4886     WHEEL,ABRASIVE
3460-00-069-4887     WHEEL,ABRASIVE
3460-00-069-4888     WHEEL,ABRASIVE
3460-00-069-4889     WHEEL,ABRASIVE
3460-00-069-4890     WHEEL,ABRASIVE
3460-00-069-4891
3460-00-069-4892     WHEEL,ABRASIVE
3460-00-069-6174     SOCKET,TAPER SHANK TOOL
3460-00-069-8994
3460-00-070-7199     CHUCK,UNIVERSAL JAW
3460-00-070-9454     BLOCK,LAPPING
3460-00-072-5207
3460-00-072-7682
3460-00-073-1300
3460-00-073-5018
3460-00-074-9519     JIG,DRILL
3460-00-075-2958
3460-00-076-5286     MANDREL,GRINDING,SH
3460-00-076-7070     SOCKET,TAPER SHANK TOOL
3460-00-076-8581
3460-00-076-8582
3460-00-076-8976     CHUCK,DRILL
3460-00-078-6485     WHEEL,ABRASIVE
3460-00-078-6512     WHEEL,ABRASIVE
3460-00-078-6513
3460-00-078-7119     WHEEL,ABRASIVE
3460-00-079-0293     JAW,MANDREL
3460-00-079-0302     JAW,MANDREL
3460-00-079-4618
3460-00-079-4973     MANDREL,TORQUE LIMITER
3460-00-079-8209
3460-00-079-8210
3460-00-079-8211
3460-00-085-7785
3460-00-085-8581     CHUCK
3460-00-086-1198
3460-00-086-1442
3460-00-087-4427
3460-00-088-5437
3460-00-088-6559
3460-00-089-0320
3460-00-089-0321
3460-00-089-0322
3460-00-089-0327
3460-00-089-0332
3460-00-089-0333
3460-00-089-8110
3460-00-090-4362
3460-00-090-4381
3460-00-090-9690
3460-00-091-5774
3460-00-091-5776
3460-00-091-9628
3460-00-091-9629
3460-00-091-9630
3460-00-091-9653
3460-00-091-9661
3460-00-092-7989
3460-00-092-8036
3460-00-092-9614
3460-00-093-4336
3460-00-095-3671     WHEEL,ABRASIVE
3460-00-095-4037
3460-00-095-4094
3460-00-097-3373
3460-00-098-6696     VISE-CLAMP,TOOLMAKER'S
3460-00-098-6697
3460-00-098-6698
3460-00-098-6699
3460-00-098-6704
3460-00-098-9176
3460-00-099-1048
3460-00-099-3484
3460-00-102-4433     WHEEL,ABRASIVE
3460-00-102-8547     ARBOR,BALANCING,COMPRESSOR
3460-00-103-4315
3460-00-103-4316
3460-00-103-4317
3460-00-103-4318
3460-00-103-4319
3460-00-103-4321
3460-00-103-4323
3460-00-103-4325
3460-00-103-4329
3460-00-103-4330
3460-00-103-4331
3460-00-103-4358     WHEEL,ABRASIVE
3460-00-103-5813     WHEEL,ABRASIVE
3460-00-103-5814     WHEEL,ABRASIVE
3460-00-104-8297     VISE,DRILL PRESS
3460-00-105-0143
3460-00-105-3193
3460-00-105-4401     CHUCK,COUPLING
3460-00-105-5705
3460-00-105-7963
3460-00-105-8242     WHEEL,ABRASIVE
3460-00-106-1186     MANDREL,MACHINE,SOLID
3460-00-106-9788
3460-00-107-2471     BENCH CENTERS
3460-00-107-2482
3460-00-109-3150
3460-00-109-3153
3460-00-109-3154
3460-00-109-4423     WHEEL,ABRASIVE
3460-00-109-4440
3460-00-109-4442
3460-00-109-4443
3460-00-109-4445
3460-00-109-4447
3460-00-109-9781
3460-00-110-1771     ARBOR,WHEEL,GRINDING-BUFFING-WIRE BRUSH
3460-00-110-3124
3460-00-110-3125
3460-00-110-3126     COLLET,MACHINE
3460-00-110-3127     COLLET,MACHINE
3460-00-110-3128     COLLET,MACHINE
3460-00-110-7127     COLLET,MACHINE
3460-00-110-7128
3460-00-111-1641
3460-00-111-1645
3460-00-111-8333
3460-00-112-5020
3460-00-112-5026
3460-00-112-5030
3460-00-118-7839
3460-00-118-7840
3460-00-119-8647     WHEEL,ABRASIVE
3460-00-119-8648
3460-00-119-8649
3460-00-120-8984
3460-00-122-0260
3460-00-127-7776     MANDREL,HOSE ASSEMBLY MACHINE
3460-00-127-7777     MANDREL,ASSEMBLING
3460-00-127-7780     MANDREL,HOSE ASSEMBLY MACHINE
3460-00-127-7781     MANDREL,HOSE ASSEMBLY MACHINE
3460-00-127-7786     MANDREL,FITTING ASSEMBLY
3460-00-127-7787     MANDREL,FITTING ASSEMBLY
3460-00-127-7789     MANDREL,ASSEMBLING
3460-00-127-7793     MANDREL,HOSE ASSEMBLY
3460-00-127-9716     WHEEL,ABRASIVE
3460-00-128-0208     WHEEL,ABRASIVE
3460-00-130-1245
3460-00-130-1246     TABLE,POSITIONING
3460-00-131-0235
3460-00-131-6220
3460-00-131-9350
3460-00-132-4232
3460-00-134-8108
3460-00-134-9209
3460-00-134-9223
3460-00-136-8473     HOLDER,CUTTING TOOL
3460-00-137-4166
3460-00-138-0582     ARBOR,INSTALLATION,
3460-00-139-1498     CLAMP,TOGGLE
3460-00-140-3095     CLAMP,TOGGLE
3460-00-140-4995     KEY,DRIFT
3460-00-140-4996
3460-00-140-4997     SOCKET,TAPER SHANK TOOL
3460-00-140-6495     DRILL,PILOT
3460-00-140-7689     INDEXING FIXTURE
3460-00-140-8942
3460-00-141-4653     WHEEL,ABRASIVE
3460-00-142-6779     ARBOR,VALVE,SEAT RE
3460-00-142-6781
3460-00-142-6782
3460-00-142-7018
3460-00-142-7645
3460-00-142-7661     FACER,SPARK PLUG INSERT
3460-00-142-7906
3460-00-142-8015
3460-00-142-8016
3460-00-142-8025
3460-00-142-8026
3460-00-142-8051
3460-00-142-8052
3460-00-142-8053
3460-00-143-1543     OIL WIPER ASSEMBLY
3460-00-143-1671     PLATE,INDEXING FIXTURE
3460-00-143-4805
3460-00-143-4806     WHEEL,ABRASIVE
3460-00-143-4807     WHEEL,ABRASIVE
3460-00-143-4813     WHEEL,ABRASIVE
3460-00-143-4818
3460-00-143-7989     HOLDER,COUNTERBORE
3460-00-143-7996     BAR,BORING TOOL
3460-00-143-8160
3460-00-143-9890
3460-00-143-9891
3460-00-143-9937
3460-00-143-9940
3460-00-144-2005
3460-00-144-2006
3460-00-144-2007
3460-00-144-2009
3460-00-144-2010
3460-00-144-2013
3460-00-144-2015
3460-00-144-2021
3460-00-144-2022
3460-00-144-2023
3460-00-144-2024
3460-00-144-2029
3460-00-144-2030
3460-00-144-2039
3460-00-144-2040
3460-00-144-2041
NSNNameStatus
3460-00-144-2042
3460-00-144-2043
3460-00-144-2044     KEY,DRILL CHUCK
3460-00-144-2045
3460-00-144-2046
3460-00-144-2047
3460-00-144-2048     KEY,DRILL CHUCK
3460-00-144-2049     KEY,DRILL CHUCK
3460-00-144-2050
3460-00-144-2051
3460-00-144-2052
3460-00-144-2053     KEY,DRILL CHUCK
3460-00-144-2057
3460-00-144-2067
3460-00-144-2069
3460-00-144-2070     HEAD ASSEMBLY,RATCH
3460-00-144-2071
3460-00-144-2072
3460-00-144-2073
3460-00-144-2074
3460-00-144-2075
3460-00-144-2076
3460-00-144-2080
3460-00-144-2081
3460-00-144-2083
3460-00-144-2190
3460-00-144-2208
3460-00-144-2209
3460-00-144-2216
3460-00-144-2219
3460-00-144-2220
3460-00-144-2225
3460-00-144-2232
3460-00-144-2233
3460-00-144-2234
3460-00-144-2235
3460-00-144-2236
3460-00-144-2237
3460-00-144-2238
3460-00-144-2239
3460-00-144-2240
3460-00-144-2241
3460-00-144-2242
3460-00-144-2243
3460-00-144-2244
3460-00-144-2245
3460-00-144-2246
3460-00-144-2247
3460-00-144-2248
3460-00-144-2249
3460-00-144-2250
3460-00-144-2251
3460-00-144-2252
3460-00-144-2253
3460-00-144-2254
3460-00-144-2661     CHUCK,BORING BAR,PR
3460-00-144-5094
3460-00-144-5095
3460-00-144-5097
3460-00-144-5098
3460-00-144-5116
3460-00-144-5140
3460-00-144-5181
3460-00-144-5187     ARBOR,CUTTER VALVE
3460-00-144-5261     BAR,BORING TOOL
3460-00-144-5412
3460-00-144-5498
3460-00-144-5506
3460-00-144-5507
3460-00-144-5617
3460-00-144-5649
3460-00-144-5666     PILOT AND NUT,COUNTERBORE
3460-00-144-5667
3460-00-144-5668     PILOT AND NUT,COUNT
3460-00-145-9190     WHEEL,ABRASIVE
3460-00-146-7683     MANDREL,HOSE CUTTING
3460-00-147-3820
3460-00-147-3821
3460-00-147-3822
3460-00-147-3823
3460-00-147-3827
3460-00-147-3829
3460-00-147-3832
3460-00-147-7036     NIB,DIAMOND,WHEEL DRESSING
3460-00-148-1050     COLLET,ELECTRODE
3460-00-148-2201     CHUCK,DRILL
3460-00-148-6713
3460-00-148-6719
3460-00-148-6720
3460-00-148-6732
3460-00-150-7163     SPLIT MANDREL
3460-00-150-7164     MANDREL-FLANGE
3460-00-152-3717
3460-00-153-2873     MANDREL,DUMMEY
3460-00-154-1219
3460-00-155-8607     WHEEL,ABRASIVE
3460-00-155-9808
3460-00-155-9809
3460-00-156-3133     NIB,DIAMOND,WHEEL DRESSING
3460-00-156-8702     ARBOR,BALANCING
3460-00-159-0711
3460-00-159-0712
3460-00-161-6867     PLATE,LAPPING
3460-00-161-6881     PLATE,LAPPING
3460-00-161-6890     PLATE,LAPPING
3460-00-161-6928
3460-00-163-1829     WHEEL,ABRASIVE
3460-00-163-1830
3460-00-163-1831
3460-00-163-1840
3460-00-163-1841
3460-00-163-5084
3460-00-163-6570
3460-00-163-6573
3460-00-164-8898     NIB,DIAMOND,WHEEL DRESSING
3460-00-165-2399     CLAMP,TOGGLE
3460-00-166-9580
3460-00-166-9581     WHEEL,ABRASIVE
3460-00-167-0346
3460-00-168-0218
3460-00-168-2136     CHUCK,COLLET
3460-00-168-3220     CHUCK,STUD
3460-00-168-3221     CHUCK,STUD
3460-00-168-3222     CHUCK,STUD
3460-00-168-3223     CHUCK,STUD
3460-00-168-3224     CHUCK,STUD
3460-00-169-6364     WHEEL,ABRASIVE
3460-00-169-7791     PILOT,COUNTERSINK
3460-00-169-7792
3460-00-170-5293
3460-00-170-5300     WHEEL,ABRASIVE
3460-00-170-5304
3460-00-170-5307
3460-00-170-5308
3460-00-170-7886     WHEEL,ABRASIVE
3460-00-171-1350
3460-00-172-3730
3460-00-172-3732
3460-00-172-3733     HEAD,BORING
3460-00-172-5183
3460-00-172-5186
3460-00-172-5291     WHEEL,ABRASIVE
3460-00-172-5292     WHEEL,ABRASIVE
3460-00-172-5293
3460-00-172-6749     COLLET,WEIGHT
3460-00-174-1853     WHEEL,BUFFING
3460-00-174-1854     WHEEL,BUFFING
3460-00-174-1856     WHEEL,BUFFING
3460-00-174-1857     WHEEL,BUFFING
3460-00-174-1858     WHEEL,BUFFING
3460-00-174-1859     WHEEL,BUFFING
3460-00-174-9165
3460-00-174-9166
3460-00-174-9167
3460-00-174-9168
3460-00-175-7652
3460-00-176-3570     HOLDER,COUNTERSINK
3460-00-176-4346     GRINDING MACHINE,MACHINE TOOL ATTACHMENT
3460-00-179-4912
3460-00-179-6804     TRACER,CONTOUR ELEC
3460-00-179-8596
3460-00-179-9761
3460-00-180-0834     CLAMP,PARALLEL,MACHINIST'S
3460-00-180-0835     CLAMP,PARALLEL,MACHINIST'S
3460-00-180-0836
3460-00-180-0837     CLAMP,PARALLEL,TOOLMAKER'S
3460-00-180-0838
3460-00-180-0839     CLAMP,PARALLEL,TOOLMAKER'S
3460-00-180-0840
3460-00-180-0841     CLAMP,PARALLEL,TOOLMAKER'S
3460-00-180-0844
3460-00-180-0846
3460-00-181-3000
3460-00-181-3001
3460-00-181-6934
3460-00-181-6935
3460-00-181-7041     COLLET
3460-00-181-7042     COLLET,MACHINE
3460-00-181-7043     COLLET,MACHINE
3460-00-181-7044     COLLET,MACHINE
3460-00-181-7046     COLLET,MACHINE
3460-00-181-7048     COLLET,MACHINE
3460-00-181-7050     COLLET,MACHINE
3460-00-181-7051     COLLET,MACHINE
3460-00-181-7052     COLLET,MACHINE
3460-00-181-7053     COLLET,MACHINE
3460-00-181-7054     COLLET,MACHINE
3460-00-181-7055     COLLET,MACHINE
3460-00-181-7056     COLLET,MACHINE
3460-00-181-7057     COLLET,MACHINE
3460-00-181-7059     COLLET,MACHINE
3460-00-181-7060     COLLET,MACHINE
3460-00-181-7930
3460-00-181-8158
3460-00-181-8161
3460-00-181-8162
3460-00-181-8163
3460-00-181-8164
3460-00-181-8165
3460-00-181-8166
3460-00-181-8167
3460-00-181-8168
3460-00-181-8169
3460-00-181-8170
3460-00-181-8175
3460-00-181-8176
3460-00-181-8177
3460-00-181-8178
3460-00-181-8222
3460-00-183-7419
3460-00-183-7420     WHEEL,ABRASIVE
3460-00-183-7422     WHEEL,ABRASIVE
3460-00-183-9034
3460-00-184-6343
3460-00-185-6716     MANDREL,HOSE CUT OFF MACHINE
3460-00-187-1180
3460-00-187-1374
3460-00-187-1401     CHUCK,DRILL
3460-00-187-2199     CHUCK,DRILL
3460-00-187-2206     DOG,LATHE
3460-00-187-2207     DOG,LATHE
3460-00-187-2208     DOG,LATHE
3460-00-187-2209     DOG,LATHE
3460-00-187-2210     DOG,LATHE
3460-00-187-2211     DOG,LATHE
3460-00-187-2212     DOG,LATHE
3460-00-187-2213     DOG,LATHE
3460-00-187-2214     DOG,LATHE
3460-00-187-2215     DOG,LATHE
3460-00-187-2216     DOG,LATHE
3460-00-187-2217     DOG,LATHE
3460-00-187-2218
3460-00-187-2219
3460-00-187-2220
3460-00-187-8673     WHEEL,ABRASIVE
3460-00-187-8674     WHEEL,ABRASIVE
3460-00-187-8677
3460-00-187-8680     WHEEL,ABRASIVE
3460-00-187-8681
3460-00-187-8682     WHEEL,ABRASIVE
3460-00-187-8683     WHEEL,ABRASIVE
3460-00-187-8684     WHEEL,ABRASIVE
3460-00-187-8692
3460-00-187-8693
3460-00-187-8694     WHEEL,ABRASIVE
3460-00-187-8695     WHEEL,ABRASIVE
3460-00-187-8696
3460-00-187-8701     WHEEL,ABRASIVE
3460-00-187-8702     WHEEL,ABRASIVE
3460-00-187-8703     WHEEL,ABRASIVE
3460-00-187-8704
3460-00-187-8705
3460-00-187-8706     WHEEL,ABRASIVE
3460-00-187-8707     WHEEL,ABRASIVE
3460-00-187-8708     WHEEL,ABRASIVE
3460-00-187-8709
3460-00-187-9615
3460-00-187-9616     WHEEL,ABRASIVE
3460-00-189-4614     CHUCK,DRILL
3460-00-189-4615     CHUCK,DRILL
3460-00-189-4616     CHUCK,DRILL
3460-00-189-4617     CHUCK,DRILL
3460-00-189-4618     CHUCK,DRILL
3460-00-189-4620     CHUCK,DRILL
3460-00-189-4621     CHUCK,DRILL
3460-00-189-4622
3460-00-189-4624     CHUCK,DRILL
3460-00-189-4626     CHUCK,DRILL
3460-00-189-4627     CHUCK,DRILL
3460-00-189-9069
3460-00-189-9070
3460-00-189-9071
3460-00-189-9072
3460-00-189-9074
3460-00-189-9075
3460-00-189-9076
3460-00-189-9077
3460-00-189-9078
3460-00-189-9079
3460-00-189-9080
3460-00-189-9081
3460-00-189-9082
3460-00-189-9103
3460-00-189-9104
3460-00-189-9106     HOLDER,CUTTING TOOL
3460-00-189-9107     HOLDER,CUTTING TOOL
3460-00-189-9109
3460-00-189-9110
3460-00-189-9111     HOLDER,CUTTING TOOL
3460-00-189-9113
3460-00-189-9114     HOLDER,CUTTING TOOL
3460-00-189-9115     HOLDER,CUTTING TOOL
3460-00-189-9120     HOLDER,CUTTING TOOL
3460-00-189-9121
3460-00-189-9129
3460-00-189-9132     HOLDER,CUTTING TOOL
3460-00-189-9133
3460-00-189-9135
3460-00-190-0061
3460-00-192-5322     COUNTERBALANCE,PORTABLE POWER TOOL
3460-00-193-3921
3460-00-195-3199
3460-00-195-3202
3460-00-195-3203
3460-00-195-3207
3460-00-196-1961     WHEEL,ABRASIVE
3460-00-196-2110
3460-00-196-2114
3460-00-196-2116
3460-00-196-2117
3460-00-196-2118
3460-00-198-6569
3460-00-198-6571
3460-00-198-6574     WHEEL,ABRASIVE
3460-00-198-6577
3460-00-198-6578
3460-00-198-6579
3460-00-198-6581
3460-00-198-6582
3460-00-198-6590
3460-00-198-6594
3460-00-198-6596
3460-00-198-6597
3460-00-198-6598
3460-00-198-6599     WHEEL,ABRASIVE
3460-00-198-6600
3460-00-199-3351     TABLE,POSITIONING
3460-00-199-6620
3460-00-201-3867     WHEEL,ABRASIVE
3460-00-203-4887
3460-00-203-4909     WHEEL,ABRASIVE
3460-00-203-6548
3460-00-203-6651
3460-00-203-6652
3460-00-203-6654
3460-00-203-6655
3460-00-203-6656
3460-00-203-6657
3460-00-203-6658
3460-00-203-6659
3460-00-203-6660     KEY,DRILL CHUCK
3460-00-203-6902     CLAMP,PARALLEL,TOOLMAKER'S
3460-00-203-7040
3460-00-203-7202
3460-00-203-7790     PLATE,LAPPING
3460-00-203-9878
3460-00-203-9902
3460-00-203-9904
3460-00-203-9905
3460-00-203-9906     CHUCK,INDEPENDENT JAW
3460-00-203-9908
3460-00-203-9910
3460-00-203-9915
3460-00-203-9967     GRINDING MACHINE,MACHINE TOOL ATTACHMENT
3460-00-203-9993
3460-00-203-9994
3460-00-204-0553
3460-00-204-0555
3460-00-204-0565
3460-00-204-0566
3460-00-204-0601
3460-00-204-0610
3460-00-204-0611
3460-00-204-0612
3460-00-204-0613
3460-00-204-0614     FACEPLATE,METALWORKING LATHE
3460-00-204-0622
3460-00-204-0645
3460-00-204-0647
3460-00-204-0666
3460-00-204-0685
3460-00-204-0686
3460-00-204-0705
3460-00-204-0706
3460-00-204-0783
3460-00-204-1641
3460-00-204-1676
3460-00-204-1685
3460-00-205-0743
3460-00-205-0747
3460-00-205-0756
3460-00-208-0742
3460-00-209-1858     WHEEL,ABRASIVE
3460-00-209-1898     WHEEL,ABRASIVE
3460-00-211-5893     HOLDER,CUTTING TOOL
3460-00-212-1644
3460-00-212-1753
3460-00-212-1754
3460-00-212-1755
3460-00-212-1756
3460-00-212-1757
3460-00-212-1758
3460-00-212-1759
3460-00-212-1821
3460-00-212-2217
3460-00-212-2711
3460-00-212-3139
3460-00-212-3140
3460-00-212-3522
3460-00-212-3525
3460-00-212-3595
3460-00-212-3599
3460-00-212-3929
3460-00-212-3944
3460-00-212-3966     ADAPTER,ARBOR PRESS
3460-00-212-4656
3460-00-212-4657
3460-00-212-4658
3460-00-212-4659
3460-00-212-4660
3460-00-212-4661
3460-00-212-4662
3460-00-212-4663
3460-00-212-4664
3460-00-212-4665
3460-00-212-4666
3460-00-212-4667
3460-00-212-4668
3460-00-212-4669
3460-00-212-4670
3460-00-212-4671
3460-00-212-4672
3460-00-212-4673
3460-00-212-4674
3460-00-212-4675
3460-00-212-4676
3460-00-212-4678
3460-00-212-4679
3460-00-212-4680
3460-00-212-4681
3460-00-212-8052
3460-00-212-8740     MANDREL,PROPELLER
3460-00-214-6000     ARBOR,BALANCING
3460-00-214-6059     ARBOR,BALANCING
3460-00-214-8727     CLAMP,ADJUSTABLE
3460-00-215-2421
3460-00-215-8561
3460-00-215-8588     WHEEL,ABRASIVE
3460-00-216-6123     WHEEL,ABRASIVE
3460-00-216-7082
3460-00-216-7083
3460-00-216-7366
3460-00-217-7136
3460-00-217-7143
3460-00-217-7145
3460-00-217-7153     WHEEL,ABRASIVE
3460-00-218-1522
3460-00-220-9528
3460-00-220-9531     TABLE,POSITIONING
3460-00-220-9543
3460-00-221-0731
3460-00-221-0732     WHEEL,ABRASIVE
3460-00-221-0733     WHEEL,ABRASIVE
3460-00-221-0735     WHEEL,ABRASIVE
3460-00-221-1104     VISE,BENCH AND MACHINE TABLE
3460-00-221-1105
3460-00-221-1106     VISE,BENCH AND MACHINE TABLE
3460-00-221-1509
3460-00-221-1510
3460-00-221-3210
3460-00-221-3705
3460-00-221-3723     WHEEL,ABRASIVE
3460-00-221-3725     WHEEL,ABRASIVE
3460-00-221-3726     WHEEL,ABRASIVE
3460-00-221-3734
3460-00-222-3764
3460-00-222-3765
3460-00-222-3766
3460-00-222-3767
3460-00-222-3768
3460-00-222-3769
3460-00-222-3806     SOCKET,TAPER SHANK TOOL
3460-00-222-3811     CENTER,LATHE
3460-00-222-3812
3460-00-222-3813     CENTER,LATHE
3460-00-222-3814
3460-00-222-3994
3460-00-222-3995
3460-00-222-3996
3460-00-222-4012     HOLDER,CUTTING TOOL
3460-00-222-4013     HOLDER,CUTTING TOOL
3460-00-222-4014
3460-00-222-4015
3460-00-222-4016
3460-00-222-4017
3460-00-222-4018
3460-00-222-4019
3460-00-222-4020
3460-00-222-4021
3460-00-222-4043
3460-00-222-4051
3460-00-222-4084
3460-00-222-4085     GRINDING MACHINE,MACHINE TOOL ATTACHMENT
3460-00-222-4094     MANDREL,EXPANSION
3460-00-222-4095     MANDREL,EXPANSION
3460-00-222-4096     MANDREL,EXPANSION
3460-00-222-4097     MANDREL,EXPANSION
3460-00-222-4098     MANDREL,EXPANSION
3460-00-222-4099
3460-00-222-4100
3460-00-222-4101

Supply Items Included in Federal Supply Class 3460

WHEEL,ABRASIVE

A rigid piece of abrasive with or without mounting facilities. Items having such mounting facilities as a fixed spindle, a threaded insert, or an arbor hole are designed for mounting on a grinding machine, tool chuck or mandrel. Items without mounting facilities are designed to be secured in a wheel holder by means of spring clamps.

VISE,BENCH AND MACHINE TABLE

A clamping device consisting of a base and two jaws mounted on a subbase. The subbase is designed for mounting on a workbench and is not normally mounted on a machine table. The base and jaw assembly may be readily detached from the subbase for use on a drilling machine, milling machine, grinding machine and the like.

CLAMP,PARALLEL,MACHINIST'S

V-BLOCK

A fixture of cast iron or steel, precision ground, having one or more V grooves machined parallel and squared with respect to the bottom, top, and ends. The block may have milled grooves on the sides to accommodate clamps which are used for holding cylindrical work.

V-BLOCK SET,MATCHED

A set of two or more matched V-blocks.

VISE,MACHINE TABLE

A clamping device consisting of a base and two jaws for use on a drilling machine, milling machine, grinding machine and the like. The base may be of stationary type or may be designed for angular adjustment. It may be bolt, screw, or strap clamp mounted or flat surface for resting upon the machine table. Excludes VISE, BENCH AND MACHINE TABLE.

ARBOR,SHELL REAMER

A bar of special steel, machined and ground, having a Morse taper or a straight shank. The body end is tapered for mounting the cutter, which also has a taper slightly smaller to assure a tight fit. It is used on drilling and milling machines for holding shell reamers.

JACK,BRACING

A device consisting of a bracing or lifting screw with nut, and a base V-shaped and slotted which permits bracing at various angles to a machine table by blocking or straddling the corners of angle plates or parallels. It is used for supporting or bracing work to be machined.

JACK,PLANER

A device consisting of a bracing or lifting screw having a self-aligning swivel head and a flat base. The body is threaded and partially slotted for a locking bolt which clamps the bracing screw in any position. It is used for leveling work on machine tools, layout and inspection tables.

JACK,VERTICAL

A device consisting of a bracing or lifting screw with nut and a flat base. Neither base nor screw revolve, the adjustment for height being made by turning the nut. It is used for leveling work on machine tools, layout and inspection tables.

BENCH CENTERS

A precision tool consisting of a base or bed with two heads fitted with hardened centers. One or both heads are adjustable on bed and locked in place by lever operated clamp gibs. It is used for inspecting and checking parts between centers.

ARBOR,WHEEL,GRINDING-BUFFING-WIRE BRUSH

A bar of steel, machined or ground, with flange(s) and/or steel nut or machine screw. Used with drill chucks, lathe chucks, machine shafts and the like for mounting abrasive wheels, buffing wheels and wire wheels. See also ADAPTER, SPINDLE, PORTABLE SANDER.

PLATE,DUPLEX,SURFACE AND LAPPING

A cast iron item with two working surfaces, one of which is smooth (not grooved) and suitable for use either as a PLATE, SURFACE or for lapping, and the other surface grooved for lapping only.

HOLDER,DRILL

A tool accessory used to hold a drill while drilling with a lathe. Excludes CHUCK, DRILL.

SOCKET,STRAIGHT SHANK TOOL

A machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of straight tool shanks.

SOCKET,TAPER SHANK TOOL

A machine socket adapter for extending the length of tool sockets and/or for converting the size of sockets to size of taper tool shanks.

CENTER,LATHE

A device having a straight or tapered shank with a shaped head used as a bearing or support for the work.

CHUCK,DRILL

An accessory for holding tools with a plain cylindrical shank such as drills, taps, or the like, by means of two or more internal selfcentering (universal) jaws. It may be attached directly to the spindle of a machine, arbor, shaft, hand mechanism, or the like without the use of centers. The jaws are simultaneously adjusted by an adjusting nut, sleeve, feed screw, or the like. The maximum rated capacity of this item is one (1) inch (25.4 mm) diameter. For universal chucks having a capacity in excess of one (1) inch (25.4 mm), see CHUCK, UNIVERSAL JAW. Excludes CHUCK, CENTERING, LATHE.

COLLET,MACHINE

A work holding device consisting of a longitudinally slotted sleeve which has a tapering or conical end designed to fit into a corresponding taper of a chuck so that the lengthwise movement of the sleeve causes a contraction or expansion of the gripping surfaces. The gripping or holding tension is actuated by a backward pull (draw in) or by a forward push (force in). Used on lathes, milling machines, screw machines and the like. Excludes SOCKET, STRAIGHT SHANK TOOL and SOCKET, TAPER SHANK TOOL.

DOG,LATHE

A machine tool accessory used as a clamp for gripping a piece of work and conveying motion to it from the face plate.

CHUCK,INDEPENDENT JAW

An accessory used for holding objects directly to the spindle of a machine, arbor, shaft or the like without the use of centers. Two or more jaws are adjusted separately, each by its own adjusting screw, to facilitate holding objects of irregular shape.

CHUCK,INDEPENDENT-UNIVERSAL JAW

An accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. It employs two or more jaws which may be separately adjusted, each by its own adjusting screw, and may also be simultaneously adjusted by gearing common to all jaws.

CHUCK,UNIVERSAL JAW

An accessory used for holding objects directly to the spindle of a machine, arbor, shaft, or the like, without the use of centers. Two or more self-centering jaws are adjusted simultaneously, usually by rotation of a scroll gear which engages slots or teeth in the back of the jaws. Maximum rated capacity is in excess of one (1) inch (25.4 mm) diameter. For universal chucks having a maximum capacity of one (1) inch (25.4 mm) or less, see CHUCK, DRILL. Excludes CHUCK, CENTERING, LATHE.

CHUCK,MAGNETIC

A device for holding ferrous items without the use of centers, jaws, clamps and the like. Used to prevent distortion of the items being held or to prevent interference with tools in a machining or hand finishing operation. Holding power is accomplished through magnetic force applied through a permanent magnet or an electromagnet, either of which may be provided with an off-on control.

HOLDER,CUTTING TOOL

An accessory designed to hold and support cutter bits or sleeve type boring bars of various types and sizes. It is used on lathes, automatic machines, planers, and shapers. Excludes items such as tool posts.

BAR,BORING TOOL

An internal turning tool, usually having a single cutting point, used to enlarge a hole, to finish to size, and to insure its being true with a specificed center line.

PILOT,COUNTERBORE

Excludes PILOT, COUNTERSINK.

PILOT,COUNTERSINK

A device specifically designed for use in conjunction with a HOLDER, COUNTERSINK to guide and align countersink cutters. Excludes PILOT, COUNTERBORE.

ARBOR,FLY CUTTER

A bar of special steel, machined and ground, having a standard milling machine or Brown and Sharpe taper shank. A square hole with set screws for holding the cutting tool is provided in the body end. It is used with a tool bit ground to an appropriate form for cutting cylindrical holes.

MANDREL,MACHINE,SOLID

A cylindrical-shaped tool with a slight taper on the over-all length, centered on each end with a flat milled on the ends for a holder. It is used for holding work for machining operations on lathes and milling machines.

GRINDING MACHINE,MACHINE TOOL ATTACHMENT

A motor driven device consisting of an abrasive wheel attached either directly to the motor shaft or to a spindle unit which is driven by a belt and an electric motor. May be used on lathes, milling machines, boring mills, shapers and slotters for grinding surface plates, rolls, journals, lathe centers, internal bores, external surfaces, or the like.

MANDREL,EXPANSION

A holding tool, tapered on the over-all length and centered on both ends with a flat milled or ground on one end for aholder which, together with a flexible sleeve, is forcibly inserted into the work to support it for machining operations on lathes or milling machines.

ARBOR,MILLING CUTTER

A bar of special steel, machined and ground, having a standard milling machine, Morse or Brown and Sharpe taper shank and furnished with or without bearing sleeves. It is used for mounting plain hole milling cutters of various types and sizes.

HOLDER,COUNTERBORE

A cylindrical body having a straight or tapered shank which holds the cutter in place by driving lugs or two splines 180 degrees (3.1 radians) apart. It is used extensively on screw machines and boring mills. Excludes HOLDER, COUNTERSINK.

HOLDER,COUNTERSINK

A cylindrical shaped device specifically designed to hold and position, as well as to control the cutting depth of a COUNTERSINK. The holder may have a micrometer stop adjustment or a plain sleeve with nut adjustment. Countersink cutters accommodated by this holder are of a specific design. Excludes HOLDER, COUNTERBORE.

ADAPTER,SPINDLE END,MILLING MACHINE

An adapter designed to fit into the end of a milling machine spindle and accommodate various cutting tool holders and/or end milling cutters having shanks of different types and sizes. See also ARBOR (as modified).

ARBOR,HOLE SAW

ARBOR,SHELL END MILL

A bar of special steel, machined and ground, having a standard milling machine or a Brown and Sharpe tapered shank. The body ends are ground to various diameters for mounting the different sizes of shell and mill cutters. It is used with adapters on milling machines having standardized spindle end and Brown and Sharpe milling machines having taper-nose or threaded spindles.

TESTER,CENTER

An instrument used in adjusting and locating centrally any point or hole in a piece of work operated upon in a lathe chuck or faceplate. It consists of a holder with a universal ball socket for holding an indicating rod or "wiggler".

NIB,DIAMOND,WHEEL DRESSING

An item consisting of an industrial diamond mounted in the end of a metal rod or bar and exposed to provide a cutting point or edge. It is used for truing, shaping, and dressing abrasive wheels. When in use, it is mounted in a suitable holder on a stand or machine and its movement across the wheel surface may be either manual or machine powered.

HEAD,FACING,AUTOMATIC FEED

A circular shaped attachment with a radial guide or ways into which a tool-carrying slide is fitted. The slide is provided with a continuous automatic feed for feeding the tool post toward or away from the center. It is designed for mounting on a bar and is used on a lathe, drilling and/or milling machine.

DRIVING MECHANISM,ELECTRIC,DRIVE HEAD

A device, consisting of a specially designed electric motor, which may be reversible, mounted in a housing, which also incloses a transmission gearing, communicating with a driving shaft extending to the operating end of the shaft housing, the whole mechanism being independently self-contained for ready portability. It is used to increase production on hand threading and cutting tools, and other manually operated mechanisms.

STONE AND HOLDER,CYLINDER HONE

A mounted length of abrasive or combination of abrasive and cork. The stone is integral with the mount for use in conjunction with a cylinder honing tool.

STAND,ABRASIVE WHEEL DRESSER

A device consisting of a cast steel base, a mandrel upon which the abrasive wheel can be mounted for revolving, and a diamond dressing nib. The diamond nib is mounted on a mechanical arm which is adjustable to the specific angle that wheel is to be trued or shaped. This arm is moved in a reciprocating motion causing the diamond to pass over the face of the revolving wheel thus performing the truing, shaping and dressing operation.

GRINDER ATTACHMENT,DRILL

A mechanical item designed to be attached to a grinder for the purpose of holding various types of drills at the proper angle for sharpening the cutting end.

ARBOR,DRILL CHUCK

HOLDING FIXTURE,COLLET CHUCKING,MACHINE

A chucklike device designed to hold, by means of a collet, various kinds of round work while performing machine or drill operations. A spacing or indexing feature may be provided to equally space holes, slots, cuts, etc. It is equipped with a lever-handle arrangement to allow for the opening, closing, and indexing of the fixture. Excludes INDEXING FIXTURE.

PEDESTAL,GRINDING MACHINE

WHEEL,BUFFING

A disk shaped item of loose, bonded, or solid construction having an arbor hole for attaching to a rotary power-operated tool or machine. It may be fabricated of a single piece of felt, rubber, leather, cork, or the like; a single piece of wood, leather covered; or plies of muslin, flannel, canvass, or the like sewed or cemented together. It is used for buffing and/or polishing or burnishing. Excludes BRUSH, ROTARY (as modified); WHEEL, ABRASIVE; and PAD, POLISHING AND RUBBING.

BRUSH,WIRE,ROTARY WHEEL

A disk shaped unit having a fill section of wire material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for roughing, buffing and/or polishing various surfaces. See also BRUSH, WIRE, ROTARY CUP; BRUSH, WIRE, ROTARY END; and BRUSH, FIBER, ROTARY WHEEL.

WHEEL SET,ABRASIVE

A group of items consisting of two or more WHEEL, ABRASIVE, of various shapes and grits, with or without mounting facilities. This may include a case or holder for storage of the items.

MANDREL SET,EXPANSION

A group of two or more MANDREL, EXPANSION.

MANDREL SET,MACHINE,SOLID

A group of two or more MANDREL, MACHINE, SOLID.

KEY,DRILL CHUCK

A hand tool designed for tightening or loosening the jaws of a drill chuck.

COLLET SET,MACHINE

FACEPLATE,METALWORKING LATHE

HEAD,BORING

MANDREL SET,HONING MACHINE

A group of two more mandrels with honing stones for use with a honing machine for removing stock from the internal cylindrical surfaces of items, such as bushings in connecting rods, pistons, spindle bodies, steering gear housings, and the like. It may or may not include truing sleeves.

PLATE,LAPPING

A round, rectangular, or square-shaped item manufactured from various metals. By comparison, its thickness is less than its length, width, or diameter. The lap (abrading surface) has narrow V-shaped or straight-sided grooves to facilitate abrading. Used to produce a geometrically flat or smooth surface by abrasion. Excludes BLOCK, LAPPING. See also PLATE, DUPLEX, SURFACE AND LAPPING and PLATE, SURFACE.

BLOCK,LAPPING

A cast iron item of solid (not ribbed) rectangular construction with plain surface(s) suitable for hand application to the part to be lapped. See also PLATE, DUPLEX, SURFACE AND LAPPING; PLATE, LAPPING; and PLATE, SURFACE.

ARBOR,ABRASIVE SHEET ELEMENT

A specific bar of special steel, machined and ground, consisting of a plain cylindrical shank at one end, and the other end vertically slotted for the insertion of abrasive sheet elements. In use it is rotated by the chuck of a drill press, lathe, flexible shaft machine, or pneumatic or electric drill for the internal deburring, cleaning, polishing or finishing of a cylindrical hole.

CHUCK,QUICK CHANGE

An item used to hold tools, such as drills, reamers, and the like without the use of jaws. It employs a sliding collar mechanism which engages a removable adapter to facilitate installation or removal of the tool.

ADAPTER,QUICK CHANGE CHUCK

A cylindrical shaped item designed to hold various cutting tools and to simplify their installation in or removal from a quick change type chuck.

COUNTERBALANCE,PORTABLE POWER TOOL

A device consisting of an adjustable spring actuated drum or reel and a wire cable having a lifting eye or hook on one end. It is designed for aerial suspension over the work bench, assembly line or the like in holding tools in counterbalanced suspension.

BRUSH,FIBER,ROTARY WHEEL

A disk shaped unit having a fill section of vegetable fiber, synthetic filament, horsehair, or animal bristle material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for polishing, buffing, and/or cleaning various surfaces. See also BRUSH, WIRE, ROTARY WHEEL.

CLAMP,PARALLEL,TOOLMAKER'S

VISE,CONTOUR GRIPPING

A clamping device consisting of a base with one stationary and one manual screw actuated jaw. Each jaw has either a series of independently sliding gripping fingers (finger type) encased in a housing, or a group of adjustable gripping cams (cam type) attached to the top. The gripping surfaces of either type may be locked in a position to grip securely irregularly shaped objects of square, round, or tapered shapes, and the like. It is designed to be mounted on a machine table.

INDEXING FIXTURE

An item designed to accurately select any degree of angle for milling, grinding, drilling, or boring operations. It is not furnished with a work-holding device such as a chuck or vise. It may be furnished with centers. It may be of the automatic angle selector type, manual (perforated disk) angle selector type, or optical system positioning type. It may consist of two units (a head and a tail-stock). Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.

MILLING-GRINDING-DRILLING-SLOTTING ATTACHMENT

A motor driven unit for milling, grinding, drilling, boring, slotting, gear cutting, thread milling, keyseating and external and internal grinding operations. It is adapted for mounting on a lathe, planer, shaper and/or boring mill. May also be used as a portable self-contained unit suitable for mounting on the item being worked, or bench mounting when provided with a feed table.

PAD,POLISHING AND RUBBING

A flat, circular disk of flexible or semiflexible fabric designed for attachment to a backing pad or polishing holder of a power driven polisher or disk buffer, used for polishing and rubbing. Excludes WHEEL, BUFFING.

VISE-CLAMP,TOOLMAKER'S

A viselike clamp with one movable and one stationary jaw. The jaw width must not exceed 2 inches (50.8 millimeters) over-all. It is furnished with a block to shorten the jaw opening span. It may be V-grooved on the under-side and may contain a hole(s) through the block for fastening to a bench.

CHUCK,CENTERING,LATHE

An item designed for centering and supporting round work without centers, such as centerless armature shafts and the like, in the tailstock of small engine lathes by means of three or more self-centering brass or bronze jaws, or an adjustable collet type brass or bronze bushing. The jaws or bushing may be adjusted for either running fit or driving fit on the round work. It is attached to the lathe by means of a tapered shank. Excludes CHUCK, DRILL and CHUCK, UNIVERSAL JAW.

DOG SET,LATHE

A group of two or more DOG, LATHE having different characteristics.

PLATE,INDEXING FIXTURE

A disk shaped item containing equally spaced holes around the face. It is used on an INDEXING FIXTURE to divide a 360 degree rotation of work into equal arcs.

SLEEVE,EXPANSION MANDREL

A cylindrical spring type metal expansion sleeve which is a component of a MANDREL, EXPANSION.

ADAPTER,JEWELER'S LATHE TOOL POST

A single piece adapter of square or rectangular cross-sectional shape, cylindrically bored, and slotted so as to be compressible, to be used when a tool post of a jeweler's lathe, which is designed to hold square or rectangular cutting tools, must be adapted to hold a round cutting tool.

COOLANT UNIT,METALWORKING MACHINERY,PORTABLE

A device consisting of a tank, pump, and fluid delivery assembly(ies), used to deliver coolant fluid to metalworking machinery not equipped with integral coolant systems.

MANDREL,TUBE BENDING

A tool that may be either flexible or rigid, designed to be inserted into a tube or hollow section to support the wall and prevent it from flattening or collapsing during bending operations. It is used with a BENDING MACHINE, PIPE AND CONDUIT.

TABLE,POSITIONING

An item designed to accurately position another item for inspection, testing, maintenance or machining. The item is capable of linear and/or rotational movement but is not furnished with a work-holding device such as a chuck or vise. It may be manually operated or motor driven. Excludes POSITIONER, WELDING.

CLAMP,MACHINE,HOLD DOWN

A clamp for holding down work on planer, punch presses, milling machines, boring mills, drill presses and the like.

WIPER,MACHINE CLEANING

An item designed to remove fluids, dust, hot chips and other contaminants from surfaces and tool ways during normal operation of the equipment.

FIXTURE,METALWORKING MACHINERY

An item mounted on a machine table and designed for clamping and releasing a workpiece in volume production. The item may operate as a vertical or horozontal fixture, depending on the induvidual design type.

HOLDER SECTION,CUTTING TOOL

PILOT,COUNTERBORE AND COUNTERSINK

An item designed for guiding a COUNTERBORE, MACHINE or COUNTERSINK which are used for counterboring or countersinking holes in a workpiece.

MANDREL,HONING,MILLING MACHINE

A metal item machined and ground with an integral shank. May have an integral guide shoe that retains and turns a dressing stone. Used in finishing inside surfaces.

JAW SET,CHUCK,INDEPENDENT JAW

Two or more opposable parts that open and close for holding something between them. Designed to be used with a CHUCK INDEPENDENT JAW.

JAW SET,CHUCK,UNIVERSAL JAW

Two or more opposable parts that open and close for holding something between them. Designed to be used with a CHUCK, UNIVERSAL JAW.

HOLDER,WORK,UNIVERSAL

A holder used with sliding and hydraulic tables to retain the work in place.

FENCE,RIP

An item which attaches to a SAW (as modified) to ensure straight and accurate cuts.

CIRCLE CUTTING ATTACHMENT

An item which assists accurate sawing of disks when used with a SAW (as modified).

INSERT SET,JAW CLAMP

Two matched items which fit into the opposing faces of the jaw(s) of a clamp or vise. They permit an item which has a curved surface to be held without damage due to crushing or squeezing during machining operations. Excludes FAIRLEAD, BLOCK.

BAR SET,BORING TOOL

A group of 2 or more bar, boring tools having similar characteristics.

STEADY REST,LATHE

An accessory, with one or more friction or roller type adjustable jaws, designed to support round material during the machining process. It may be bed or carriage mounted.

CHUCK,COLLET

An item designed to be adapted to a machine spindle to accommodate a collet for holding work to be machined. It may be mounted directly to the spindle or to an arbor or adapter which in turn mounts to the spindle. The chuck is manipulated to contract or expand the collet which in turn grips or releases the work. Excludes HOLDING FIXTURE, COLLET CHUCKING, MACHINE.

LOCATOR,CENTRE,WORKPIECE

A device designed to fit into the end of a spindle from metalworking machinery. It aligns the machine spindle with datum face of a workpiece.

SHIELD,PROTECTIVE,MACHINE TOOL

A device mounted on lathes, milling machines, drilling machines and the like to prevent injury to the operator from the chuck, the cutting tool and shavings during machining operations. Excludes SHIELD, EYE, GRINDING WHEEL.